Tired Of False Alarms? Follow These Recommendations For Using Home Security Motion Sensors In Jefferson City
Have you been woken in the wee hours of the morning by a false alarm triggered by a home security motion sensor? Having your sleep disturbed is bad enough, but it’s even worse when you aren’t able to determine what caused the alarm. Luckily, false alarms are fairly easy to circumvent. Try these simple recommendations for using motion-activated devices and learn how the proper positioning and upkeep will help tremendously in minimizing false alarms.
How To Prevent Motion Detector False Alarms In Jefferson City
A critical part of your home security, motion sensors typically get an unfavorable reputation because of false alarms. Although motion detection is found in different tools like surveillance systems and lights, false alarms are most often blamed on standalone units mounted in corners of rooms. To limit false alarms, avoid installing them in areas where they could be triggered by the following:
- Pets maneuvering over furniture
- Spinning of ceiling fans
- Curtains or drapes moving from your HVAC fan
- Temperature fluctuations due to sunshine or heating systems
You also need to keep an eye on upkeep. Dying batteries will reduce functionality and ultimately lead to outages. Hardwired devices might have a damaged or pinched wire. You also need to clean regularly, as certain creepy crawlies like to camp out in corners. As you’re straightening up, verify the motion sensor cover is secure.
Thankfully, most leading systems can reduce false alarms prompted by pets by excluding animals below 2 ½ feet tall and weighing 85 pounds or less. Check what devices can do before buying to make certain you have the options you want.
What’s The Ideal Positioning For Jefferson City Motion Sensors?
Keep home security motion sensors high on walls so they can cover as much of your space as possible, and that should include windows and doors. While placing them close to entryways could seem sensible, this placement could limit the complete coverage area. Moreover, being too close to a hot, sunny window may set off sensors that perform by detecting heat changes. Reputable home security companies will advise you on proper placement.
How To Use Your Motion Sensors
Spotting trespassers is the primary job of motion sensors, but there are many other reasons for using them. Here are just a few:
- Energy savings. Motion-sensing lights save energy by illuminating only when people are present. You may even link your device to a smart thermostat and change temperature settings based on whether people are home.
- Monitor kids. Motion sensors can alert you when your kids arrive home from school.
- Trigger indoor surveillance cameras. You can set up your indoor cameras to start recording if a motion sensor detects a disturbance.
When installing a modern home defense system, you can configure all kinds of personalized automation with motion detectors.
Order Motion Sensors As Part Of Your Complete Home Security Package in Jefferson City
Get the top-notch protection you want for your family with a comprehensive home security installation in Jefferson City from Secure24 Alarm Systems. Our dependable motion-sensing equipment can be integrated with other smart devices like thermostats, lighting, and cameras. Dial (573) 200-8693 today to enhance the safety of your home.